OrtenMake

OrtenMake

You will have a "1st emergency" manual for easy maintenance operations. We also work with local partners, who have been trained for our milling machines and can quickly intervene for the maintenance of your machines.
It depends on both the orthopedic device and the milling machine. For information, it takes about 9 minutes to mill a trunk with OrtenMake Complete.
It depends of course on the rate of use. However, with an intense use of the milling machine, you can change once a year the milling cutter. If you see differences on the cutter, on the milling quality or the milling speed, you can order a new milling cutter at Proteor.
The machine is granted with a two year warranty.
A day is planned for the installation, followed by a day of training to master the software. Our experts are at your disposal for any questions by phone or email. We can take remote control of the milling machine.
We offer 3 types of milling machines, depending on the orthopedic devices you want to mill. Please consult this page of our website for all the details.
We recommend you to suck up the chips carefully every day. In addition, an annual preventive maintenance is recommended.